Designed for use with the Banks Monster-Ram intake system, this 750 Watt Heat Upgrade Kit adds substantial cold-weather starting power. When installed on a Dual-Heat capable Monster-Ram, this kit helps you achieve cold starts as low as -30 °F (-34 °C) with block heat, and -20 °F (-29 °C) without block heat.

Product Overview

The kit includes a high-performance 750 Watt coil heater along with the necessary hardware to bolt into your Monster-Ram system. It’s engineered to replace the restrictive factory grid heater and provide a stronger, safer cold-start solution in harsh climates.

Key Features & Benefits

• Adds 750 Watt heating capacity to your Monster-Ram, doubling the heater output when used in Dual-Heat configuration.
• Enhances cold-weather starting ability in extreme temperatures: tested to -30 °F with block heat.
• Simple bolt-on installation with included coil heater, copper washer, and wiring extension.
• Maintains the Monster-Ram’s high-flow design — no compromise to airflow performance.
• Helps eliminate the failure-prone factory grid heater system, offering a more reliable solution.

What’s Included

• 750 Watt high-performance coil heater
• Copper washer for secure mounting
• Heater coil extension wire
• Installation instructions

Installation

Installation is straightforward for a mechanically inclined DIYer and typically takes under an hour. The kit is designed to work with the Monster-Ram intake system and does not require additional tuning or modifications. Follow the wiring instructions carefully for safe operation.

Cold-Weather Performance Notes

During laboratory-style testing, combining the Dual-Heat capable Monster-Ram with two 750 Watt coil heaters enabled cold starting at temperatures as low as -30 °F (-34 °C) when used in conjunction with a block heater. Without block heat, the system still achieved cold starts down to -20 °F (-29 °C). Real world results may vary depending on battery condition, fuel quality, soak time, and ambient conditions.

Compatibility & Fitment

This kit is designed to work with Monster-Ram intake systems. Ensure your vehicle is equipped with a compatible Monster-Ram setup before purchasing. Not intended as a standalone heater solution — the base Monster-Ram intake must be installed.