{"product_id":"2007-5-2012-freedom-series™-street-hd-6-7l-cummins-common-rail-long-block","title":"2007.5-2012 Freedom Series™ Street HD 6.7L Cummins Common Rail Long Block","description":"\u003cp\u003eOur Freedom Street HD Series is perfect for severe duty or heaving heavy towing applications up to 700 HP. Machined and assembled in our state-of-the-art Freedom Racing Engine shop, our engines are remanufactured with the critical upgrades to the common problem areas and includes upgraded stainless hardware kit. Fully blueprinted with all clearances exceeding factory specifications.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFeatures\u003cbr\u003eReconditioned block that is decked, bored, torque plate honed, align honed, pressure tested, and painted black.\u003cbr\u003eAftermarket Heavy Duty Connecting rods\u003cbr\u003eNew pistons and rings\u003cbr\u003eUpgraded 12mm main studs and hardened main dowels\u003cbr\u003eReconditioned factory crankshaft\u003cbr\u003eHamilton 178\/208 camshaft\u003cbr\u003eNew H Series main and rod bearings\u003cbr\u003eNew tappets\u003cbr\u003eIncludes Fluidampr with full power kit and 5\/16” dowel installed in crank snout\u003cbr\u003eNew oil pump\u003cbr\u003eNew oil cooler\u003cbr\u003eNew oil pressure relief valve and regulator spring\u003cbr\u003eNew engine oil pan\u003cbr\u003eNew freeze plugs in all block locations\u003cbr\u003eNew front and rear main seals with wear sleeve\u003cbr\u003eNew lower gasket kits\u003cbr\u003eNew head gasket\u003cbr\u003eCustom Age 625 head studs\u003cbr\u003eFreedom Series Street HD Cylinder Head\u003cbr\u003eA case of Amsoil break-in oil and Fleetguard filter\u003cbr\u003eUpper engine gasket kit\u003cbr\u003eFINAL TESTED\u003cbr\u003eAll long blocks are run on a fully automated engine test stand after assembly.  This testing includes:\u003c\/p\u003e\n\u003cp\u003eVacuum testing of the entire coolant system.\u003cbr\u003ePre-torque test to pre-lube and verify oil flow to all components.\u003cbr\u003eTorque test and measurement of crankshaft loads.\u003cbr\u003eRun-in test to verify oil pressure and flow.\u003cbr\u003eCompression test on all cylinders. \u003cbr\u003eINSTALLING DEALERS\u003cbr\u003eFor a list of our Authorized Engine Dealers use our Dealer Locator at the top of the webpage.  Filter by \"Engine Sales\" to see our nationwide map of Authorized Dealers located nearest to you. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eShipping and Core Charge\u003cbr\u003e* A core charge is included with the purchase and all customers should review our LONG BLOCK CORE CHARGE AND ACCEPTANCE POLICY in advance. If you need assistance in scheduling freight service for the return of a core, please contact us at 317-286-3573 or email our core department directly at cores@fleeceperformance.com. Return freight service for a core is available for $500 from any commercial location in the continental US.\u003c\/p\u003e\n\u003cp\u003e* All long blocks ship Freight for $500 anywhere in the continental US.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDocumentation Included\u003cbr\u003eLong block Limited Warranty\u003cbr\u003eCore Return Form\u003cbr\u003eLong Block Core Charge Acceptance Policy\u003cbr\u003eEngine Break-in Procedure\u003cbr\u003eRocker Box Modification Instructions\u003cbr\u003eINSTALLATION NOTES\u003cbr\u003eThe long block is shipped with the following gaskets and seals:\u003c\/p\u003e\n\u003cp\u003eCamshaft seal\u003cbr\u003eWater pump seal\u003cbr\u003eCrankcase drain gasket\u003cbr\u003eCoolant inlet, A\/C compressor bracket O-ring\u003cbr\u003eFuel banjo washers\u003cbr\u003eCP3 nut access cover gasket\u003cbr\u003eCP3 snout O-ring\u003cbr\u003eAdditional sensor O-rings\u003cbr\u003eWe recommend the following new valvetrain components to accompany our long blocks:\u003c\/p\u003e\n\u003cp\u003eRocker Arm Assemblies (FPE-CUMM-RAA-CR)\u003cbr\u003ePushrods (FPE-CUMM-S2-PROD)\u003cbr\u003eBillet Rocker Arm Bridges (FPE-BRAB-C1)\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e* Proper valve lashing is required. Back off adjusters on rocker arms during installation or damage will occur to the cylinder head and\/or piston to valve contact may occur.\u003c\/p\u003e\n\u003cp\u003eWarranty\u003cbr\u003e1 Year Limited Warranty\u003c\/p\u003e\n\u003cp\u003eBuyer MUST complete the Warranty Registration Form within 30 days of purchase or warranty will be VOID. To complete the registration, follow the QR code included with your engine package or go to: www.fleeceperformance.com\/engineregistration. Buyer must accept the terms of the Limited Warranty including coverages and exclusions provided by Fleece Performance Engineering.\u003c\/p\u003e\n\u003cp\u003eBuyer must retain all records and documented proof of adherence to the published Engine Break-in Procedure.\u003c\/p\u003e","brand":"Fleece Performance","offers":[{"title":"Default Title","offer_id":48550685212913,"sku":"FPE-CUMM-67E-LB-HD","price":15799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/1344\/3057\/files\/fpe-cumm-67l-lb-f1_1_71c8b0f8-7215-4c2d-9828-76242b0e6824.png?v=1786653279","url":"https:\/\/tamelessperformance.com\/products\/2007-5-2012-freedom-series%e2%84%a2-street-hd-6-7l-cummins-common-rail-long-block","provider":"TAMELESS PERFORMANCE","version":"1.0","type":"link"}