2013-2018 Freedom Series™ Street 6.7L Cummins Common Rail Long Block

Our Freedom Street Series is perfect for a daily driver or towing application. Machined and assembled in our state-of-the-art Freedom Racing Engine shop, our engines are remanufactured with the critical upgrades to the common problem areas. Fully blueprinted with all clearances exceeding factory specifications, our Street Series engine will get you back on the road faster. 

 

Features
Reconditioned block that is decked, bored, torque plate honed, align honed, pressure tested, and painted black.
Genuine Cummins rods
New pistons and rings
New main bolts and hardened main dowels
Reconditioned factory crankshaft
Reconditioned factory camshaft
New P Series main and rod bearings
New tappets
New oil pump
New oil cooler
New oil pressure relief valve and regulator spring
New engine oil pan
New freeze plugs in all block locations
New front and rear main seals with wear sleeve
New lower gasket kits
New head gasket
Custom Age 625 head studs
Freedom Series Street Cylinder Head
A case of Amsoil break-in oil and Fleetguard filter
Upper engine gasket kit
FINAL TESTED
All long blocks are run on a fully automated engine test stand after assembly.  This testing includes:

Vacuum testing of the entire coolant system.
Pre-torque test to pre-lube and verify oil flow to all components.
Torque test and measurement of crankshaft loads.
Run-in test to verify oil pressure and flow.
Compression test on all cylinders. 
INSTALLING DEALERS
For a list of our Authorized Engine Dealers use our Dealer Locator at the top of the webpage.  Filter by "Engine Sales" to see our nationwide map of Authorized Dealers located nearest to you. 

 

Shipping and Core Charge
* A core charge is included with the purchase and all customers should review our LONG BLOCK CORE CHARGE AND ACCEPTANCE POLICY in advance. If you need assistance in scheduling freight service for the return of a core, please contact us at 317-286-3573 or email our core department directly at cores@fleeceperformance.com. Return freight service for a core is available for $500 from any commercial location in the continental US.

* All long blocks ship Freight for $500 anywhere in the continental US.  

 

Documentation Included
Long block Limited Warranty
Core Return Form
Long Block Core Charge Acceptance Policy
Engine Break-in Procedure
Rocker Box Modification Instructions
INSTALLATION NOTES
The long block is shipped with the following gaskets and seals:

Camshaft seal
Water pump seal
Crankcase drain gasket
Coolant inlet, A/C compressor bracket O-ring
Fuel banjo washers
CP3 nut access cover gasket
CP3 snout O-ring
Additional sensor O-rings
We recommend the following new valvetrain components to accompany our long blocks:

Rocker Arm Assemblies (FPE-CUMM-RAA-CR)
Pushrods (FPE-CUMM-S2-PROD)
Billet Rocker Arm Bridges (FPE-BRAB-C1)
 

* Proper valve lashing is required. Back off adjusters on rocker arms during installation or damage will occur to the cylinder head and/or piston to valve contact may occur.

Warranty
1 Year Limited Warranty

Buyer MUST complete the Warranty Registration Form within 30 days of purchase or warranty will be VOID. To complete the registration, follow the QR code included with your engine package or go to: www.fleeceperformance.com/engineregistration. Buyer must accept the terms of the Limited Warranty including coverages and exclusions provided by Fleece Performance Engineering.

Buyer must retain all records and documented proof of adherence to the published Engine Break-in Procedure.

2013 Ram 2500/3500 6.7L 24V Cummins
2014 Ram 2500/3500 6.7L 24V Cummins
2015 Ram 2500/3500 6.7L 24V Cummins
2016 Ram 2500/3500 6.7L 24V Cummins
2017 Ram 2500/3500 6.7L 24V Cummins
2018 Ram 2500/3500 6.7L 24V Cummins

SKU: FPE-CUMM-67L-LB

GTIN: 732777409006

Manufacture Name: Fleece

Shipping Weight:

Shipping Length:

Shipping Width:

Shipping Height:

EO Number:

Cross Reference #

California Proposition 65 Warning - P65warnings.ca.gov