Hamilton Cams 12 Valve Dual Valve Springs 07-s-002
Hamilton Cams 12 Valve Dual Valve Springs 07-s-002
Couldn't load pickup availability
⚠ WARNING: Cancer & Reproductive Harm
⚠ WARNING: Cancer & Reproductive Harm
California Proposition 65 Warning - P65warnings.ca.gov
Share
Dual valve springs made in the USA, designed to handle high-RPM engines with increased valve lift, spring pressures, and valve sizes. Includes retainers and 10-degree locks. Good up to .700" lift.
- Made in the USA
- Dual spring setup for high-RPM engines
- Suitable for lifts up to .700"
- Comes with retainers and 10-degree locks
- Requires specific modification for stem seals
- Installation requires correct installed height settings
As RPM, valve lift, and spring pressures increase, a single spring may no longer provide adequate valve control. For engines at this level, a dual spring becomes necessary. These USA-made springs come with retainers and 10-degree locks and can handle valve lifts up to .700". It is essential to have the installed height set correctly, which your machine shop can handle.
To install, you may need to modify the head for smaller stem seals, using tools like the Comp Cam 519-16, Howards Cams cutter 92035, and 5/16″ arbor 92085. The modification is simple and can be done in about five minutes with a cordless drill.
PART # 07-s-002
UPC # 857340008704
Hamilton Cams 12 Valve Dual Valve Springs 07-s-002
Dual valve springs made in the USA, designed to handle high-RPM engines with increased valve lift, spring pressures, and valve sizes. Includes retainers and 10-degree locks. Good up to .700" lift.
- Made in the USA
- Dual spring setup for high-RPM engines
- Suitable for lifts up to .700"
- Comes with retainers and 10-degree locks
- Requires specific modification for stem seals
- Installation requires correct installed height settings
As RPM, valve lift, and spring pressures increase, a single spring may no longer provide adequate valve control. For engines at this level, a dual spring becomes necessary. These USA-made springs come with retainers and 10-degree locks and can handle valve lifts up to .700". It is essential to have the installed height set correctly, which your machine shop can handle.
To install, you may need to modify the head for smaller stem seals, using tools like the Comp Cam 519-16, Howards Cams cutter 92035, and 5/16″ arbor 92085. The modification is simple and can be done in about five minutes with a cordless drill.
PART # 07-s-002
UPC # 857340008704
Hamilton Cams 12 Valve Dual Valve Springs 07-s-002