S&B Filters JLT Big Air Intake Dry Filter 2012-15 ZL1 Camaro Tuning Required SB CAIP-CZL1-12D
S&B Filters JLT Big Air Intake Dry Filter 2012-15 ZL1 Camaro Tuning Required SB CAIP-CZL1-12D
Couldn't load pickup availability
JLT's Cold Air Intake kit for the 2012-2015 Camaro ZL1 are available in textured black plastic Finish.
Designed to make huge power this new kit has a large 123mm ID at the MAF and a 4.5 inch opening at the throttle body to meet up to the biggest the aftermarket has.
This huge 5 inch opening requires a massive filter. We love the tapered flange design and Powerstack filtered ends of SB's filters and ended up with a monster 5x7 inch filter. With deep pleats and a built in bellmouth to smooth air flow across the MAF you don't get much better than this. Finish it off with a silicone reducer and stainless clamps and you got the BEST Intake on the market!!!
Tuning Required!
Molded In MAF
It's a full 123mm ID at the MAF area
Heat Shield
Includes ABS plastic Heat Shield to block engine heat at idle and low speed.
It incorporates the fresh air inlet from the grill.
It uses a large area to make sure the filter has tons of cool air.
Kit Includes:
- JLT Plastic Intake in Black Textured Finish
- Silicone reducer
- 5x7 SB Powerstack Air Filter RDry Filter
- ABS Heat Shield
- HD Clamps, and all needed hardware
Gains and Testing
We have tested on stock and modded ZL1's with awesome results. With Brent Hughes' tune and the SCT X4 we have seen 45 RWHP over stock and on a modded ZL1 (cam, pulley, headers and more) we saw 30 RWHP over the competitors Cold Air Intake!
Tuning
A JLT specific tune is Required with this kit.
Easy Install
This product is NOT CARB (California Air Resource Board) Exempt.It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.
CAIP-CZL1-12D
⚠ WARNING: Cancer & Reproductive Harm
⚠ WARNING: Cancer & Reproductive Harm
California Proposition 65 Warning - P65warnings.ca.gov
S&B Filters JLT Big Air Intake Dry Filter 2012-15 ZL1 Camaro Tuning Required SB CAIP-CZL1-12D
JLT's Cold Air Intake kit for the 2012-2015 Camaro ZL1 are available in textured black plastic Finish.
Designed to make huge power this new kit has a large 123mm ID at the MAF and a 4.5 inch opening at the throttle body to meet up to the biggest the aftermarket has.
This huge 5 inch opening requires a massive filter. We love the tapered flange design and Powerstack filtered ends of SB's filters and ended up with a monster 5x7 inch filter. With deep pleats and a built in bellmouth to smooth air flow across the MAF you don't get much better than this. Finish it off with a silicone reducer and stainless clamps and you got the BEST Intake on the market!!!
Tuning Required!
Molded In MAF
It's a full 123mm ID at the MAF area
Heat Shield
Includes ABS plastic Heat Shield to block engine heat at idle and low speed.
It incorporates the fresh air inlet from the grill.
It uses a large area to make sure the filter has tons of cool air.
Kit Includes:
- JLT Plastic Intake in Black Textured Finish
- Silicone reducer
- 5x7 SB Powerstack Air Filter RDry Filter
- ABS Heat Shield
- HD Clamps, and all needed hardware
Gains and Testing
We have tested on stock and modded ZL1's with awesome results. With Brent Hughes' tune and the SCT X4 we have seen 45 RWHP over stock and on a modded ZL1 (cam, pulley, headers and more) we saw 30 RWHP over the competitors Cold Air Intake!
Tuning
A JLT specific tune is Required with this kit.
Easy Install
This product is NOT CARB (California Air Resource Board) Exempt.It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.
CAIP-CZL1-12DS&B Filters JLT Big Air Intake Dry Filter 2012-15 ZL1 Camaro Tuning Required SB CAIP-CZL1-12D