Share
SKU:314000910
PPE MicroPure® Engine Oil Filter - Replaces Motorcraft FL-910S, Toyota 90915-YZZD3
PPE MicroPure® Engine Oil Filter - Replaces Motorcraft FL-910S, Toyota 90915-YZZD3

Description
MicroPure® Engine Oil Filter replaces Motorcraft FL-910S
The oil filter is your engine’s first line of defense against contaminants that degrade oil performance and reduce oil lifespan. Poor filter performance and the presence of oil contaminants can lead to premature wear and potential failure of engine internals. The OEM filter falls short, only offering 136 square inches of 25-micron filtration capability and using a weak leaf spring, reducing seal quality and allowing dirty oil to blow past the filter media.
PPE’s upgraded filter provides 177 square inches of filtration area, a 30% increase over the OEM filter. The specially engineered ultra-fine synthetic blend MicroPure® media achieves a 10-micron nominal rating. An integrated high-temperature rated neodymium magnet also allows the PPE filter to capture ferrous particles, preventing them from clogging the media, extending filter and oil life. The use of a heavy-duty coil spring ensures a secure seal between the media end cap and the base plate, eliminating dirty oil blow-by and maximizing filtration performance.
In contrast to competitors’ unsealed bypass valve, the PPE filter incorporates a steel-NBR poppet and a precision coil spring to ensure a proper seal and consistent performance. The PPE filter also features a heat-resistant silicone anti-drainback valve, retaining oil in the filter after the engine is turned off for superior protection against dry starts.
The PPE filter’s heavy-duty construction, consisting of a high-strength steel base plate with increased thread engagement and large oil passages as well as a durable metal center tube for rigid media support and pressure resistance, allow for maximum confidence in all conditions. Additionally, PPE’s TorqSTOP™ Technology prevents over-tightening and reinforces the rubber gasket, enabling a burst pressure rating of 450PSI.

Spec card
Fitments
2026 Ford Ranger 4 Cyl 2.3 Liter Turbo; 2024-2026 Polaris Ranger Xd 1500 3 Cyl 1.5 Liter; 2022-2025 Ford Maverick 4 Cyl 2.5 Liter Hybrid; 2022-2025 Ford Maverick 4 Cyl 2.0 Liter Turbo; 2021-2026 Ford Bronco Sport 2 0L I4 Gas; 2021-2026 Ford Bronco 1 5L I3 Gas; 2021-2025 Ford Bronco 4 Cyl 2.3 Liter Turbo Gas; 2021-2024 Ford Ranger 4 Cyl 2.3 Liter Turbo; 2021 Ford Mustang 4 Cyl 2.3 Liter Turbo; 2020-2024 Ford Explorer 4 Cyl 2.3 Liter Turbo; 2020-2022 Ford Explorer 4 Cyl 2.3 Liter Turbo; 2020 Ford Ranger 4 Cyl 2.3 Liter Turbo; 2020 Ford Mustang 4 Cyl 2.3 Liter Turbo; 2016-2023 Toyota Tacoma 4 Cyl 2 7L; 2015-2017 Ford Mustang 4 Cyl 2.3 Liter Turbo; 2015-2017 Ford Focus 4 Cyl 2.3 Liter Turbo; 2007-2013 Toyota Tundra 6 Cyl 4 0L; 2005-2015 Toyota Tacoma 6 Cyl 4 0L; 2005-2015 Toyota Tacoma 4 Cyl 2 7L; 2005-2006 Toyota Tundra 8 Cyl 4 0L; 2003-2009 Toyota 4RUNNER 4 0L V6 Gas; 2003-2009 Lexus Gx470 8 Cyl 4 7L; 2003-2008 Toyota 4RUNNER 4 7L V8 Gas; 2001-2007 Toyota Sequoia 8 Cyl 4 7L; 2000-2009 Toyota Tundra 8 Cyl 4 7L; 1998-2007 Lexus Lx470 8 Cyl 4 7L; 1993-2006 Toyota Land Cruiser 6 Cyl 4 7L; 1993-2006 Toyota Land Cruiser 6 Cyl 4 5L; 1993-1998 Toyota Supra 6 Cyl 3.0 Liter Turbo; 1987-1992 Toyota Supra 6 Cyl 3.0 Liter Turbo
Instructions
Specifications
SKU: 314000910
GTIN: 840171229691
Manufacture Name: PPE
Shipping Weight: 0.85
Shipping Length: 3.125
Shipping Width: 3.125
Shipping Height: 4.5
EO Number:
Cross Reference #
Warranty
California Proposition 65 Warning
California Proposition 65 Warning - P65warnings.ca.gov
314000910
PPE MicroPure® Engine Oil Filter - Replaces Motorcraft FL-910S, Toyota 90915-YZZD3
MicroPure® Engine Oil Filter replaces Motorcraft FL-910S
The oil filter is your engine’s first line of defense against contaminants that degrade oil performance and reduce oil lifespan. Poor filter performance and the presence of oil contaminants can lead to premature wear and potential failure of engine internals. The OEM filter falls short, only offering 136 square inches of 25-micron filtration capability and using a weak leaf spring, reducing seal quality and allowing dirty oil to blow past the filter media.
PPE’s upgraded filter provides 177 square inches of filtration area, a 30% increase over the OEM filter. The specially engineered ultra-fine synthetic blend MicroPure® media achieves a 10-micron nominal rating. An integrated high-temperature rated neodymium magnet also allows the PPE filter to capture ferrous particles, preventing them from clogging the media, extending filter and oil life. The use of a heavy-duty coil spring ensures a secure seal between the media end cap and the base plate, eliminating dirty oil blow-by and maximizing filtration performance.
In contrast to competitors’ unsealed bypass valve, the PPE filter incorporates a steel-NBR poppet and a precision coil spring to ensure a proper seal and consistent performance. The PPE filter also features a heat-resistant silicone anti-drainback valve, retaining oil in the filter after the engine is turned off for superior protection against dry starts.
The PPE filter’s heavy-duty construction, consisting of a high-strength steel base plate with increased thread engagement and large oil passages as well as a durable metal center tube for rigid media support and pressure resistance, allow for maximum confidence in all conditions. Additionally, PPE’s TorqSTOP™ Technology prevents over-tightening and reinforces the rubber gasket, enabling a burst pressure rating of 450PSI.

Spec card
PPE MicroPure® Engine Oil Filter - Replaces Motorcraft FL-910S, Toyota 90915-YZZD3
