Share
SKU:BAF132H
Switched Power Harness BigBanger 2x Pods Morimoto
Switched Power Harness BigBanger 2x Pods Morimoto
Description
Power Up: The Morimoto BigBanger LED Pods have been developed from the ground up to set a new standard in their segment, and the same goes for the wiring. This harness is designed to control the pods and their dual intensity backlight with ease. OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity.
Triple sealed proprietary 4-pin relay with hanger. Proprietary over-molded inline fuse holder with 20A mini fuse. DT06-4S female outputs with dual seals.
Stainless steel power and ground terminals. Proprietary M-Spec push button switch with amber-LED backlight. Proper: All wiring is properly sized and relays rated for flicker-free, reliable power delivery.
Every line of the 16 awg copper wiring is protected with black mesh insulation. Every connector has been over-molded, sealed, or protected with heavy duty heat shrink. Your factory wire harness will fall apart before this thing.
Plug n Play: The connections on the harness have been laid out in a logical way to power a BigBanger LED pod on each side of your vehicle. There are two deutsch outputs. A positive battery terminal, a ground terminal, and a switch.
The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall.
Features and Benefits:
- Harness: 1x Morimoto BigBanger 2-Pod Power Harness
- Switch Subharness 1: 1x M-Spec Push Button Switch
- Switch Subharness 2: Upfitter Switch Inputs (35cm 20AWG)
- Output Extension: 1x 1.25m/49.2 Inch Extension
- Backlight Power Kit: 1x Mini Fuse Tap, 1x Micro Fuse Tap
- Warranty: Five (5) Years
Details:
- Daytime Running Light Included: No
- Fitment: Universal
- Height: 3.0 Inch
- Install Difficulty: Easy Do It Yourself (DIY)
- Length: 14.0 Inch
- Series: BigBanger
- Pair Or Single: Single
- Plug N Play: Yes
- Switch Included: Yes
- Weight: 0.1 LB
- Width: 7.0 Inch
- Relay: Triple-Sealed 40A M-Spec
- Switch: Normally-Off M-Spec w/ Amber backlight
- Outputs: 2x Deutsch DT 4-Pin Female
- Main Input: 12V+/- Battery Ring Terminals (8.5mm ID / 15mm OD)
- Wiring: 14AWG-20AWG Copper Stranded
- Backlight Input: :1x Mini 7.5A Fuse Tap or 1x Micro 7.5A Fuse Tap
- Insulation: Black Tech Flex Braided Mesh
Fitment Notes:
- LED Pods: Morimoto BigBanger
- Pod Quantity: Two (2)
- A-Pillar Setups: Yes
- Universal Mount Setups: Yes
- Fog Light Setups: Yes
Fitments
Instructions
Specifications
SKU:
GTIN:
Manufacture Name:
EO Number:
Cross Reference #
Warranty
California Proposition 65 Warning
California Proposition 65 Warning - P65warnings.ca.gov
Switched Power Harness BigBanger 2x Pods Morimoto
Power Up: The Morimoto BigBanger LED Pods have been developed from the ground up to set a new standard in their segment, and the same goes for the wiring. This harness is designed to control the pods and their dual intensity backlight with ease. OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity.
Triple sealed proprietary 4-pin relay with hanger. Proprietary over-molded inline fuse holder with 20A mini fuse. DT06-4S female outputs with dual seals.
Stainless steel power and ground terminals. Proprietary M-Spec push button switch with amber-LED backlight. Proper: All wiring is properly sized and relays rated for flicker-free, reliable power delivery.
Every line of the 16 awg copper wiring is protected with black mesh insulation. Every connector has been over-molded, sealed, or protected with heavy duty heat shrink. Your factory wire harness will fall apart before this thing.
Plug n Play: The connections on the harness have been laid out in a logical way to power a BigBanger LED pod on each side of your vehicle. There are two deutsch outputs. A positive battery terminal, a ground terminal, and a switch.
The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall.
Features and Benefits:
- Harness: 1x Morimoto BigBanger 2-Pod Power Harness
- Switch Subharness 1: 1x M-Spec Push Button Switch
- Switch Subharness 2: Upfitter Switch Inputs (35cm 20AWG)
- Output Extension: 1x 1.25m/49.2 Inch Extension
- Backlight Power Kit: 1x Mini Fuse Tap, 1x Micro Fuse Tap
- Warranty: Five (5) Years
Details:
- Daytime Running Light Included: No
- Fitment: Universal
- Height: 3.0 Inch
- Install Difficulty: Easy Do It Yourself (DIY)
- Length: 14.0 Inch
- Series: BigBanger
- Pair Or Single: Single
- Plug N Play: Yes
- Switch Included: Yes
- Weight: 0.1 LB
- Width: 7.0 Inch
- Relay: Triple-Sealed 40A M-Spec
- Switch: Normally-Off M-Spec w/ Amber backlight
- Outputs: 2x Deutsch DT 4-Pin Female
- Main Input: 12V+/- Battery Ring Terminals (8.5mm ID / 15mm OD)
- Wiring: 14AWG-20AWG Copper Stranded
- Backlight Input: :1x Mini 7.5A Fuse Tap or 1x Micro 7.5A Fuse Tap
- Insulation: Black Tech Flex Braided Mesh
Fitment Notes:
- LED Pods: Morimoto BigBanger
- Pod Quantity: Two (2)
- A-Pillar Setups: Yes
- Universal Mount Setups: Yes
- Fog Light Setups: Yes
Switched Power Harness BigBanger 2x Pods Morimoto